Tool Connection Laser 5258 User Manual

www.lasertools.co.uk
ALWAYS
• Keep tool clean and dust free.
• Keep force screw thread clean and well lubricated (light machine oil).
• Wear eye protection when using.
Valve Spring Compressor
For universal use on SOHC and DOHC engines
Designed to allow the removal of valve springs and valve stem oil seals
with the cylinder head in place.
Combustion chamber is pressurised via the supplied spark plug air line adaptor
which holds the valve in place during the valve spring compression operation.
• Fast set up time due to the twin rail pivot system.
• Single handed operation.
www.lasertools.co.uk
5258
Contents:
A: Support bar x 2
B: Spark plug Air-line adaptor
C: Adjustable upright x 2
D: Compressor force screw assembly
E: Valve adaptor
F: Extension rods
A
C
B
C
E
F
C
D
E

Tool Connection Laser 5258 Specifications

General

Brand	Tool Connection
Model	Laser 5258
Category	Power Tool
Language	English

Summary

Safety Precautions

Safety First. Be Protected.

Emphasizes the importance of safety before operating the tool.

Instructions for Use

Initial Setup and Mounting

Guides on preparing the engine, locating mounting points, and attaching the tool components.

Valve Spring Compression and Removal

Details on compressing the valve spring, removing collets, and fitting new valve stem seals.

Reassembly and Repetition

Instructions for re-compressing the spring, inserting collets, and repeating for other valves.