To Next PageTo Next Page
Need help?Do you have a question about the Tool Shop 241-9019 and is the answer not in the manual?
Details on wearing eye, ear, and lung protection during operation.
Guidelines for safe electrical operation and avoiding hazards.
Maintaining a safe and clean work environment to prevent accidents.
Personal protective equipment and safe operating practices.
Proper usage, maintenance, and care of power tools.
Guidelines for using and caring for battery-powered tools.
Instructions on securing workpieces for safe drilling and driving.
Information on recycling and disposing of battery packs properly.
Step-by-step guide to charging the 18V battery pack.
Procedure for inserting the battery pack into the drill/driver handle.
Location and use of the integrated bit storage feature.
How to set the torque clutch for different screw driving applications.
Operation of the switch that controls drilling direction.
How to use the trigger for variable speed control.
Step-by-step instructions for inserting and tightening drill bits.
Procedure for safely removing drill bits from the chuck.
Functionality and use of the integrated bubble level.
Detailed guide on how to perform drilling operations safely and effectively.
Instructions for driving screws with the drill/driver.
Steps to secure a loose chuck on the drill/driver.
Information regarding the lubrication of the drill/driver's bearings.
How to remove and prepare battery packs for recycling.
Specific maintenance procedures for Ni-Cd batteries.
Tips and warnings for caring for Nickel-cadmium batteries.
Procedure to restore capacity in Nickel-cadmium batteries.
Details of the 1-year limited warranty for the cordless drill.
General