ToolPRO 35L User Manual

Key safety precautions and warnings to reduce risk of fire, electric shock, or injury.

Release latch to open housing, remove wheels and accessories.

Install castor wheels into the designated holes on the base.

Connect hose to vacuum port or blower port for desired function.

Insert handle, connect extension tubes and floor tool with twisting motions.

Use HEPA/dust bag for dry, foam filter for wet. Never operate without filters.

Plug into socket, press switch to turn on/off. Use waterproof cover.

Drain water by removing cover; adjust airflow with sliding block.

Release the latch to open the housing for access to the dust barrel.

Carefully empty the dust barrel to remove collected debris.

Reassemble the housing and securely fasten the latch.

Remove, wash with mild soap and water, and thoroughly rinse filters.

Allow filters to air dry completely before reinstalling them.