Need help?Do you have a question about the TOOLSMART TS04 and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Continuity Buzzer | Yes |
| Square Wave Output | Yes |
| Data Hold | Yes |
| Battery | 9V |
| DC Current | 10A |
| Frequency Range | 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz |
| Temperature Range | -20°C to 1000°C |
| Safety Rating | CAT III 600V |
Highlights core functionalities like 10 functions, 26 ranges, and various measurement capabilities.
Lists the included items: test leads, thermocouple probe, plug adapter, and battery.
Summarizes critical safety precautions and warnings for using the multimeter.
Provides further safety advice, including handling voltage, probe usage, and battery replacement.
Step-by-step guide on how to install the 9V battery into the multimeter.
Basic guidelines on using test leads and connecting them for measurements.
Explains how to freeze the current measurement displayed on the LCD.
Details how to switch between Auto Ranging and Manual Ranging modes.
Instructions on how to disable the automatic power-off function of the multimeter.
Step-by-step guide for safely measuring AC and DC voltage with the multimeter.
Detailed procedure for measuring AC and DC current, including safety warnings.
Guide on how to measure electrical resistance using the multimeter.
Instructions for using the thermocouple probe to measure temperature.
Procedure for testing circuit continuity with the multimeter's beeper function.
Steps to test a diode's forward voltage drop and integrity.
How to measure the voltage of batteries using the multimeter.
Instructions for using the Non-Contact Voltage detector feature.
Guide on connecting and using the multimeter with the ToolSmart mobile app.
Detailed steps for identifying and replacing blown fuses in the multimeter.
To Next Page