2.Install the left and right horizontal wings
Take the right and left horizontal wings from the box and add some AB glue( mix the AB glue according
to 1:1), and connect the right and left horizontal wings to the fuselage.Please make sure that the arms
turns to upper direction and the two horizontal wings are in the same line, then connect the left and
right evevator controlling steel wire.
1.Install the right and left main wings
Take the fuselage and main wings and accessory bag from the box.Use some AB glue and mix it according
to 1:1, stick the right and left wings to the fuselage correctly.Please make sure that the right wings and
left wings are in the same horizontal position and connected firmly.Connect the left and right aileron servo
wire ,please put the tail of the wire into the slot.
Assemble processes
2
To Next Page
Loading...