1.Turn on the transmitter , and please make sure that there is enough power for the transmitter.
Push the joystick for throttle and throttle trim switch to the lowest position,and other trim switch
should be in the neutral position.
4
Adjustment steps
2.Please make sure that the battery is full power ,and connect to the ESC plug , then install the battery
into the battery case.
3.Please catch the front part of the fuselage and push the throttle slowly to make sure that the motor
can work normally.
4.Please check the control surface and front wheel can work or not.Do not make it reverse, and make
sure that the control surface &free wheel and the joystick are in the same direction.
To Next Page