Need help?Do you have a question about the Topcon SL-100 and is the answer not in the manual?
General| Brand | Topcon |
|---|---|
| Model | SL-100 |
| Category | Radio Modems |
| Language | English |
Configures serial control lines for the interface board.
Configures serial port routings for the interface board.
Procedure for inserting the SIM card into the device.
Details about the SL-R3 antenna and its connection.
Details the Ethernet cable for configuring SL-R3.
Details the serial cable for configuring GPS boards.
Details the 12-pin DTM06 connector (A-coded, Gray) for power/ground/serial.
Details the 12-pin DTM06 connector (B-coded, Black) for CAN/Ethernet.
Specifies connector types for radio and GPS antennas.
Steps to configure computer Ethernet port and IP address for connection.
Steps to load firmware for the MC-13 device.
Instructions for updating SL-R3 firmware.
Settings for GPRS dial-up, APN, and SIM PIN configuration.
Setting serial ports 1 and 2 for GPS functionality.
Unchecking "Enabled" to disable GPS communication to SLR3.
Uploading RAM and Flash files for firmware update.
Indicates the status of the power LED (Green).
Indicates the status of the transmit LED (Green/Red/Amber).
Indicates the status of the Bluetooth LED (Blue).
To Next Page
