Need help?Do you have a question about the Topcon SRL-35 and is the answer not in the manual?
Details the CALL SIGN identifier feature required in some countries for radio modems.
Explains how the RF power amplifier is protected against overheating by reducing power.
Describes the current limit protection for the Power Amplifier to prevent damage due to high current.
Details the SRL-35's serial port (Port 1) which complies with the RS-232 standard.
Covers the LCD display, push buttons, and LED indicators for modem status and configuration.
Describes the TNC type RF connector and frequency settings for the radio modem.
Explains the asynchronous data format, speed, character length, parity, and stop bits for serial communication.
Describes the use of RS-232 handshake signals like CTS, RTS, and CD for controlling data transfer.
Details entering Programming Mode and configuring settings using Topcon Receiver Utility (TRU).
Explains how to modify settings like frequency, protocol, and repeater mode using the device's LCD.
Covers checklist, RS-232 wiring, fuse, power supply, and antenna installation steps.
Provides guidance on installing external antennas for mobile and base station setups, including positioning and cable types.
Discusses parameters like transmitter power, receiver sensitivity, and antenna height that impact connection range and quality.
Explains how the SRL-35 can be used as a repeater station to extend network coverage.
Details how to use primary and secondary addresses for routing messages in networks with repeaters.
Covers methods like dual addressing and address pairs for managing repeater chains and preventing loops.
Provides detailed physical, environmental, and electrical/radio performance specifications for the SRL-35 modem.
Explains the 8-pin ODU data connector and 4-pin ODU MINI-SNAP power connector, including pinouts.
Covers warranty terms, essential safety warnings regarding RF exposure, product usage, and handling.
Details functional delays and transmission timing under various conditions, including FEC and channel spacing.
Provides step-by-step instructions for configuring settings, frequency, and ports using a terminal program.
Lists international standards and compliance information for the SRL-35, including CE-marking.
Details the CALL SIGN identifier feature required in some countries for radio modems.
Explains how the RF power amplifier is protected against overheating by reducing power.
Describes the current limit protection for the Power Amplifier to prevent damage due to high current.
Details the SRL-35's serial port (Port 1) which complies with the RS-232 standard.
Covers the LCD display, push buttons, and LED indicators for modem status and configuration.
Describes the TNC type RF connector and frequency settings for the radio modem.
Explains the asynchronous data format, speed, character length, parity, and stop bits for serial communication.
Describes the use of RS-232 handshake signals like CTS, RTS, and CD for controlling data transfer.
Details entering Programming Mode and configuring settings using Topcon Receiver Utility (TRU).
Explains how to modify settings like frequency, protocol, and repeater mode using the device's LCD.
Covers checklist, RS-232 wiring, fuse, power supply, and antenna installation steps.
Provides guidance on installing external antennas for mobile and base station setups, including positioning and cable types.
Discusses parameters like transmitter power, receiver sensitivity, and antenna height that impact connection range and quality.
Explains how the SRL-35 can be used as a repeater station to extend network coverage.
Details how to use primary and secondary addresses for routing messages in networks with repeaters.
Covers methods like dual addressing and address pairs for managing repeater chains and preventing loops.
Provides detailed physical, environmental, and electrical/radio performance specifications for the SRL-35 modem.
Explains the 8-pin ODU data connector and 4-pin ODU MINI-SNAP power connector, including pinouts.
Covers warranty terms, essential safety warnings regarding RF exposure, product usage, and handling.
Details functional delays and transmission timing under various conditions, including FEC and channel spacing.
Provides step-by-step instructions for configuring settings, frequency, and ports using a terminal program.
Lists international standards and compliance information for the SRL-35, including CE-marking.
General| Brand | Topcon |
|---|---|
| Model | SRL-35 |
| Category | Radio Modems |
| Language | English |
To Next Page
