Topcon SRL-35 - Changing Protocol (Radio Protocol of the Active Radio); Select Repeater (Set SRL-35 to Act as a Repeater)

Settings
Changing Parameters using the LCD Display
28
SRL-35 Operator’s Manual P/N: 1003224-01
Changing Protocol (Radio Protocol of the Active Radio)
Select Repeater (Set SRL-35 to Act as a Repeater)
Press ▲ or ▼ until the display panel and the
cursor > points to “Select Protocol” and press
”Select” to move onto the next submenu to
change protocol.
Select
> Protocol
PacCrest - 4FSK
EXIT ▲▼ Select
Press ▲ or ▼ until the desired protocol is selected
and press “SET” if the protocol is to be modified.
Press “CANCEL” if not modifying protocol and
return to previous menu.
>SATELLINE-3AS
PacCrest-4FSK
PacCrest-GMSK
TrimTalk 450S (P)
TrimTalk 450s (T)
PacCrest - FST
CANCEL ▲▼ SET
If protocol is modified press “YES” to save settings or “NO” to discard
changes and return to previous menu.
Save changes?
NO YES
Press ▲ or ▼ until the display panel and the
cursor > points to “Select Repeater” and press
”Select” to move onto the next submenu to turn
repeater off or on.
SELECT
> Repeater OFF
EXIT ▲▼ SELECT
Press ▲ or ▼ until the desired repeater setting is
selected and press “SET” if the repeater setting is
to be modified. Press “CANCEL” if not modifying
repeater setting and return to previous menu.
> Repeater OFF
Repeater ON
CANCEL ▲▼ SET