Appendix B
Changing Parameters Using a Terminal Device
72
SRL-35 Operator’s Manual P/N: 1003224-01
Special Functions
Special functions are modified by selecting from the main menu selection ”7”. The current values of the
parameters are displayed and can be modified in toggle-type fashion by choosing the appropriate
parameter selection number from the list displayed. The next menu level will then enable the modification
of the values (within allowed limits).
Number 7 is pressed in the Main Menu.
Activating Tests
Tests can be activated by selecting main menu selection ”9”. Tests are activated by setting the status of the
desired test to ”ON” and will remain active until the value of the selection in the menu is returned to the
value ”OFF”.
Restoring Factory Settings
The settings that the modem was delivered from the factory are called “factory settings”.
Selecting main menu selection “A” can restore factory settings.
Additional setup
Toggle ON/OFF values. Current value shown.
------------------------------------------
1) Error correction OFF
2) Error check OFF
3) Repeater OFF
4) SL-commands ON
5) Priority TX
6) Full CRC16 check OFF
7) User Data whiten OFF
Enter selection or ESC to previous menu >
Enter selection >9
Tests setup
-----------
1) Short block test OFF
2) Long block test OFF
Enter selection >A
Restore factory settings
------------------------
Do you want to restore factory settings? (Y/N)>
To Next Page
Loading...
