Topcon SL-D Series User Manual

SL-D
SERIES
ISSUED............... AUG. 2003
REVISED ............
REPAIR MANUAL
PHOTOGRAPHING DEVICE
TOPCON CORPORATION
P-SLD_OPTION-0-0308-14

Topcon SL-D Series Specifications

General

Frequency	50/60 Hz
Type	Slit Lamp Microscope
Eyepieces	10x, 16x
Slit Width	0 to 14 mm continuously variable
Slit Length	1 to 14 mm continuously variable
Filters	Cobalt blue, green (red-free), neutral density
Light Source	Halogen (optional LED)
Voltage	100-240V
Magnification Changer	Galilean-type, 5-step (6.3x, 10x, 16x, 25x, 40x)

Summary

1. INTRODUCTION

1-1 Features

Details the various camera options available for the photographing device.

1-2 Target Users of This Manual

Identifies the intended audience for this repair manual, emphasizing prior experience.

1-3 How to Use This Manual and Precautions

Provides guidance on manual usage and general safety precautions for repairs.

1-3-1 Precautions for repair

Outlines critical safety and procedural precautions to be followed during repair work.

1-3-2 Repair procedure

Presents a flowchart detailing the general steps for performing repairs.

1-4 Part Names and Functions

Illustrates and describes the main components of the SL-D7 and photographic power supply.

1-5 Names of Optical Parts and Functions

Explains the optical units and their operational roles within the system.

1-6 Electric System Wiring Diagram

Visual representation of the electrical connections and system layout.

1-6-1 Power supply electric system wiring diagram (FD-21)

Detailed wiring diagram for the power supply unit (FD-21).

1-6-2 Main unit electric system wiring diagram

Wiring diagrams for various configurations of the main unit with connected cameras.

2. REPAIR WORKS

2-1 Inspection

Describes methods and criteria for inspecting the SR-52, SR-53, and DC-1 units.

2-2 Adjustments

Provides procedures for adjusting optical components and systems.

2-2-1 SR-52

Detailed adjustment procedures for the SR-52 unit, focusing on positioning.

2-2-2 SR-53

Detailed adjustment procedures for the SR-53 unit, focusing on positioning.

2-3 Order of Repairs

General guidelines and precautions for disassembling and assembling units.

2-3-1 SR-52 Disassembly and assembly procedure

Step-by-step instructions for disassembling and assembling the SR-52 unit.

2-3-2 Trouble shooting (Photographic unit)

Identifies symptoms, causes, and treatments for photographic unit issues.

2-3-3 Trouble shooting (Photographic power supply)

Troubleshooting flowchart for issues related to the photographic power supply.

2-3-4 Wiring check

Describes checks for disconnection and short circuits in wiring.

2-3-5 Electric parts arrangement

Illustrates the physical location of key electrical components within units.

2-3-6 Electric parts number table

Lists electrical parts with their part names, symbols, order numbers, and ratings.

2-4 Repair Tool List

Lists specialized and general tools required for repair procedures.

2-4-1 Special repair tool list

Details specific tools like focus positioning tools and diopter scopes.

2-4-2 General repair tool list

Lists common tools such as testers, screwdrivers, pliers, and soldering irons.