Topdon ArtiLink600 - User Manual

ArtiLink600
Code Reader
USER MANUAL
Hotline (+86)0755-23576169
Email support@topdon.com
Website www.topdon.com
Facebook @TopdonOcial
Twitter @TopdonOcial
MADE IN CHINA
If you have any questions or
doubts, please
contact us via

Summary

Welcome

About ArtiLink600

Introduces the TOPDON ArtiLink600 scanner, its features, and target users.

Package Contents

Lists all items included in the product package.

Vehicle Compatibility

Details the vehicle communication protocols supported by the ArtiLink600.

Important Notices

General Information of OBDII

Explains the purpose of the OBDII system and the information it provides.

Diagnostic Trouble Codes (DTCs)

Explains the structure and meaning of Diagnostic Trouble Codes (DTCs) with an example.

Product Overview

Component Identification

Identifies and describes the main components and ports of the ArtiLink600 scanner.

Operation Guide

Preparation and Connection

Guides users through the initial preparation and connection steps for using the scanner.

ABS;SRS Systems Diagnosing

Explains how to diagnose ABS and SRS systems, including reading info and fault codes.

Maintenance Services

Oil Reset Service

Explains how to reset the engine oil life system service lamp.

Steering Angle Reset

Describes the procedure for resetting the steering angle sensor after repairs.

Battery Maintenance Reset

Outlines how to reset the vehicle battery monitoring unit after replacement.

OBDII;EOBD Diagnostics

Reading Diagnostic Codes

DTC Interpretation Hints

Provides tips on selecting the vehicle manufacturer to interpret DTCs.

Manufacturer Specific Codes

Lists car brands to select for manufacturer-specific DTC interpretation.

Code Management

Erasing Diagnostic Codes

Explains how to clear diagnostic trouble codes from the vehicle after repairs.

Diagnostic Terms Glossary

Defines common abbreviations and terms used in emission-related diagnostics.

Emissions Readiness Check

Live Data Stream

Advanced Diagnostic Tests

Freeze Frame Data

Explains how to capture a snapshot of operating conditions when an emission-related fault occurs.

O2 Sensor Test Results

Guides users on how to view O2 sensor monitor test results from the vehicle's computer.

On-Board Monitor Test

Explains how to retrieve test results for emission-related components not continuously monitored.

EVAP System Leak Test

Details how to perform a leak test for the vehicle's EVAP system.

Vehicle Information Retrieval

Data Review and Deletion

DTC Code Lookup

Injector Function Explanation

Printing Diagnostic Records

Record Upload and Print Manager

Help and Information Access

Guides users on how to access scanner information, OBD introduction, and upgrade details.

Glossary of Diagnostic Terms

Defines terms related to DLC location, abbreviations, tool info, and OBD.

Scanner Settings and Configuration

Product Registration Process

Guides users on how to register their ArtiLink600 product online.

Software Update Procedure

Technical Specifications

Safety Warnings

Usage Precautions

Frequently Asked Questions

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Safety Warnings and Cautions

The TOPDON ArtiLink600 is an advanced OBD2 scan tool designed for diagnosing and maintaining vehicles from 1996 and newer (OBDII & CAN). It offers a comprehensive suite of diagnostic capabilities and reset services, making it suitable for experienced DIYers, automotive mechanics, and garage owners.

Function Description:

The ArtiLink600 provides a wide range of diagnostic functions, including:

• ABS/SRS Systems Diagnosing: This function allows users to diagnose Anti-lock Brake System (ABS) and Supplemental Restraint System (SRS) issues. It can read version information, read and clear fault codes, read data streams, and perform active tests for these systems.
• Reset Services: The device features three commonly used reset services for daily vehicle maintenance:
  • Oil Reset: Resets the oil service lamp for the engine oil life system, which calculates optimal oil life change intervals based on driving conditions. This is useful after an oil change or if the service lamp is on.
  • Steering Angle Reset: Resets the steering angle, necessary after replacing the steering angle position sensor, steering mechanical parts (e.g., steering gearbox, column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering the car body.
  • Battery Maintenance System Reset: Performs a resetting operation on the vehicle battery's monitoring unit, clearing low battery fault information and matching the battery. This is required when the main battery or battery monitoring sensor is replaced.
• OBDII/EOBD Diagnosing: After connecting to the vehicle's DLC, the scanner automatically checks the communication protocol and establishes a link. It then displays monitor status information, including MIL status, DTCs in the ECU, readiness status (completed, not completed, not supported), datastream supported, and ignition type.
  • Read Codes: Identifies which section of the emission control system has malfunctioned by reading SAE-standard DTCs. If a code is manufacturer-specific, the user can select the manufacturer to view its definition.
  • Erase Codes: Clears codes from the vehicle after retrieving them and performing necessary repairs.
  • I/M Readiness: Checks if various emissions-related systems are operating properly and are ready for Inspection and Maintenance testing. It also confirms if car fault repairs have been performed correctly.
  • Data Stream: Retrieves and displays live data and parameters from the vehicle's ECU.
  • View Freeze Frame: Captures a snapshot of operating conditions when an emission-related fault occurs.
  • O2 Sensor Test: Retrieves O2 sensor monitor test results from the vehicle's on-board computer.
  • On-Board Monitor Test: Retrieves test results for emission-related powertrain components and systems that are not continuously monitored.
  • EVAP System Test: Initiates a leak test for the vehicle's EVAP system.
  • Vehicle Info: Retrieves vehicle information from the on-board computer, including VIN (Vehicle Identification Number), CID (Calibration ID), and CVN (Calibration Verification Number).
• Review: Allows users to review or delete recorded DTCs, Data Streams, and Freeze Frame data.
• DTC Lookup: Enables users to view detailed definitions of retrieved DTCs by manually inputting the code. It also provides diagnostic tips/solutions.
• Print: Facilitates printing of records saved from Read Codes or Data Stream by connecting the scanner to a computer via a USB cable.
• Help: Provides information about the scanner, including DLC location, abbreviations of automotive terms, tool information (serial number, register code), and an introduction to OBD.
• Settings: Allows users to configure the tool setup, including language, unit of measure, beeper (on/off), and record mode (on/off).
• Register & Update: Enables users to register the product and update the software via a computer with internet access. The update process involves downloading and installing the TOPDON ArtiLink600 Update software package, connecting the device, and running the update tool.

Important Technical Specifications:

• Display: 3.5-inch Color LCD with 320x480 resolutions.
• Input Voltage Range: 9-18V.
• Working Temperature: 32°F to 122°F (0°C to 50°C).
• Storage Temperature: -4°F to 158°F (-20°C to 70°C) @ RM60%.
• Dimensions: 6.07 x 3.43 x 1.22 inches (154.3 x 87 x 31 mm).
• Weight: 14.64 oz (415g).
• Compatibility: Compatible with KWP2000, ISO9141, J1850 VPW, J1850 PWM, CAN (Controller Area Network), and more protocols.

Usage Features:

• Intuitive Interface: The device features a clear LCD screen and a user-friendly menu structure with dedicated shortcut keys for common functions like Read DTC, Erase DTC, I/M Readiness, and Help.
• LED Indicators: Equipped with LEDs (Green, Yellow, Red) to quickly indicate fault code status (No Fault, Pending Fault, Permanent Fault).
• Diagnostic Cable with LED: The diagnostic cable includes LED illumination to assist with clear inspection in dark areas of the vehicle's DLC socket.
• USB Connectivity: Allows connection to a computer for software updates and printing diagnostic reports.
• TF Card Slot: For reading or writing data/files stored on the TF card (memory card included).
• On-Screen Instructions: Guides users through diagnostic and reset procedures with clear prompts.

Maintenance Features:

• Firmware Updates: The device's firmware can be updated via a computer to ensure it has the latest features and vehicle compatibility. This also helps fix bugs like flickering screens or damaged fonts.
• Cleaning: The scanner should be kept dry, clean, and free from oil/water or grease. A mild detergent on a clean cloth can be used to clean the exterior.

Safety Warnings and Cautions:

• Always perform automotive testing in a safe environment.
• Do not smoke near the vehicle during testing.
• Avoid placing the code reader near hot engine or exhaust pipes.
• Do not wear loose clothing or jewelry when working on an engine.
• Do not connect or disconnect test equipment while the ignition is on or the engine is running.
• Do not disassemble the code reader.
• Be aware that engine parts become hot; avoid contact to prevent burns.
• Operate the vehicle only in a well-ventilated area when the engine is running due to carbon monoxide production.
• Wear safety eye protection that meets ANSI standards.
• Ensure the vehicle battery is fully charged and the scanner is firmly connected to the DLC to avoid erroneous data.
• Do not use the code reader during driving.
• Keep clothing, hair, hands, tools, and test equipment away from moving or hot engine parts.
• Keep the scanner out of reach of children.

Topdon ArtiLink600 Specifications

General

Brand	Topdon
Model	ArtiLink600
Category	Barcode Reader
Language	English