10
3.5 Turn the Ignition to the "ON" Position (see Figure 3-7)
To locate the vehicle's DLC, tap Is the OBD-II port not in the above
location? to select vehicle make, model and year, and tap Next. A
picture of DLC location for the selected vehicle will display.
Follow the on-screen instructions to start the vehicle engine. Then
tap Next.
If your vehicle is equipped with a keyless start system and the
ignition switch is an "Engine Start Stop" button (see Figure 3-8), press
the "Engine Start Stop" button until the car is in "ON" mode. Do not
apply the brake while pressing the "Engine Start Stop" button or you
will start the car instead of putting it in the "ON" position.
The method of ignition varies by vehicle model. Refer to the vehicle's
service manual for details.
Figure 3-6
Figure 3-5
To Next Page
Loading...