6
Download and Connect TB6000Pro app
First, turn on the Bluetooth before setting up the connection. You can only set the
Bluetooth connection in the TB6000Pro app, nowhere else!
To download the app, go to your phone’s app store and search for TB6000Pro. To connect
your phone with TB6000Pro via Bluetooth, you need to turn on the Bluetooth in settings or
in your phones control centre or notification panel. Finally, open the TB6000Pro app and
tap the Bluetooth icon to establish connection with the unit.
Charging a Battery
To understand the 6 charging modes, refer to the chart below.
Charge 12V Wet, Gel, MF, Cal, EFB, and AGM
batteries through 9-step smart charging.
12V/6A Lithium-
ion Battery
Charge 12V li-ion batteries, including lithium iron
phosphate (LiFePO4).
Repair old or sulphated batteries through small
current and pulse current.
Charge 6V Wet, Gel, MF, Cal, EFB, and AGM
batteries through 9-step smart charging.
Provide an output supply of a
constant voltage of 13.5V and a
maximum current of 6A (81W). If the battery is
damaged or Er4 error is reported, you can select
this mode to recover battery charging.
To Next Page
Loading...
