Topeak HEXUS X User Manual

Install new chain pin or remove old chain pin.
Use Primary Chain Link Fence to install
or remove chain pin. Use Secondary
Chain Link Fence to loosen stiff links.
Primary Chain
Link Fence
Secondary
Chain Link Fence
4mm
Allen
key
WARNING
Chain Pin Tool
Press chain pin
as little as
necessary to
loosen the
stiff link.
4mm for
chain pin breaker
+ +
15g14g
USING CHAIN TOOL
HEXUS
™
X
USER'S GUIDE
Tire Lever
Air Pressure
Release Button
Presta Core tool
EN
8 mm 5 mm 6 mm 5 mm 4 mm 4 mm
4 mm
3 mm
4 mm
2.5 mm 2 mm Phillips T15T25T30
2 mm
4 mm
2.5 mm
Chain
Hook
T25 Torx
T30
Torx
Chain pin breaker
6 mm
3 mm
5 mm
Phillips
Chain
Tool
8 mm
T25
T15
When pressing in the chain pin, push down on the
top of the chain to keep it fully engaged in the
chain tool cradle. Make sure the press pin of the
chain tool is centered against the chain pin.
Inspect chain rivet again and be
sure chain links can bend freely
after replacement.
* The chain tool is compatible with
single and multi-speed chains up to 12
speed, NOT including Campagnolo® 11
speed hollow pin chains.

Topeak HEXUS X Specifications

General

Type	Multi-Tool
Torx Wrench	T25
Material (Body)	Aluminum
Allen Wrenches	2, 2.5, 3, 4, 5, 6, 8mm
Spoke Wrenches	14G, 15G
Tire Levers	2
Material (Tools)	Steel
Screw Drivers	Phillips, Flat

Summary

Using Chain Tool

Chain Pin Installation and Removal

Instructions for installing or removing chain pins using the primary chain link fence and loosening stiff links with the secondary fence.

Chain Pin Pressing Technique

Guidance on pressing chain pins correctly, ensuring full engagement and centering the press pin against the chain pin.

Post-Replacement Chain Inspection

Check chain rivet after replacement to ensure links can bend freely.

Using Chain Hook and Chain Tool

Chain Hook and Tool Integration

Demonstrates the combined use of the chain hook and chain tool for chain maintenance.

Tool Maintenance and Specific Uses

T25 Torx for Disc Brakes

Utilizing the T25 Torx bit to tighten disc brake rotor bolts.

8mm Allen Key Use

Instructions for inserting the 5mm Allen key into the 8mm tool bit for specific applications.

Tire Lever Adjustment

Using the T25 Torx bit on the tire lever to adjust its folding resistance.

Presta Valve Core Tool

Functionality of the built-in tool for tightening or removing two-piece Presta valve cores.

Air Pressure Release Button

Operation of the air pressure release button for tire inflation.

General Maintenance and Warranty

Tool Care Recommendations

Advice on lubricating the tool with Teflon-based lubricant and keeping it dry to prevent rusting.

Product Warranty Information

Details on the 2-year warranty for mechanical components and requirements for warranty claims.