Tighten the Wheel Magnet onto spoke and align with sensing point on sensor.
3
Unscrew the wheel
magnet to install on spoke.
Pre-fit Sensor and Rubber Bracket on left rear
chainstay (non-drive side) and trim excess
rubber from bracket. Insure the Topeak logo
is facing up. Install zip ties loosely to allow
sensor placement.
2
GB
Tech: Bluetooth® Smart super low energy technology
Battery Lifetime
(approx): 900 hours (2.5 years with 1 hr/ day use)
Battery: CR2032 x 1 pc (included)
Transmission Range: < 5 meter (16.4 ft)
Waterproof: IPX 5
Weight: 21 g / 0.74 oz
Operating temperature: -10ºC ~ 50ºC
(14ºF~122ºF)
SPECIFICATION
Cadence Sensor
Sensing Point
Speed Sensor
Sensing Point
Cadence Magnet Holder
Cadence Magnet
Holder
6 mm 8 mm
Zip Tie
Rubber
Bracket
Cadence Magnet Set (A)
for pedal axle hexagon socket
Wheel Magnet Set
Rubber Bracket Set
Cadence Magnet Set (B)
for crankarm
Zip Tie
Rubber Pad
Sync to PanoBike App and other Apps with Bluetooth® Smart (BLE 4.0) connection program.
INSTALLATION
TIPS : Proper distance between Sensor and Magnet : < 25 mm
Install Cadence Magnet on left crankarm near
pedal as shown. Do not tighten zip ties
completely to allow magnet placement.
Cadence Magnet Set (B)
OPTION
A
OPTION
B
Top View
1
IMPORTANT NOTE
Align Wheel Magnet with Speed
Sensor Sensing Point as shown
to insure magnet does not
interfere with Cadence Sensor.
IMPORTANT NOTE
Align Cadence Magnet with Cadence Sensor
Sensing Point as shown to insure magnet
does not interfere with Speed Sensor.
Speed Sensor
Sensing Point
Top View
Cadence
Magnet
Cadence Sensor
Sensing Point
Cadence
Magnet
Cadence Sensor
Sensing Point
User's Guide
PANOBIKE SPEED & CADENCE SENSOR
Top View
Preset suitable 6 or 8 mm
Cadence Magnet Set.
Cadence Magnet Set (A)
6 mm 8 mm
Optional
Installation
(for solid axle)
or
or
6 mm
6 mm
4 mm
IMPORTANT NOTE
Align Cadence Magnet
with Cadence Sensor
Sensing Point as shown
to insure magnet does
not interfere with
Speed Sensor.
For Round Spokes
For Bladed Spokes
6 mm
4 mm
Cadence Magnet
6 or 8 mm