Topens UPS01 - User Manual

C030565
User Manual of the Uninterrupted Power Supply
Model: UPS01
Thank you for your purchasing of the 24VDC 150W uninterrupted power supply. The power supply
can be used as power source for the swing gate opener as well as the other 24VDC electrical
appliance. The wire connection is very convenient because of the plug & play design. You can
plug it to the AC main electricity and connect the 24VDC output to the appliances. 24VDC Battery
(2PCS 12VDC batteries connected in series) can be added to the power supply as the main power
or the back-up power. The AC electricity can charge the battery if it’s used as a back-up power. A
maximum 240W 24VDC solar panel can be attached to the power supply to charge the batteries
as well.
Specifications
AC Input: 100-240V~ 50/60Hz
Battery Input: 24VDC (2PCS 12VDC batteries connected in series)
Solar Input: 24VDC (Max. 240W)
Rated output: 24VDC/150W Output Peak power: 180W IP degree: IP65
Features
Over-load / Over-current / Short circuit / Over-heat protection
Wire Connection of the power supply
1 Firstly please connect the output of the power supply to the electrical appliance. It can be wired
to the TOPENS A/AD/PW series swing gate opener by plug the output wire to the power input

Summary

Power Supply Specifications

Input and Output Parameters

Details AC input, battery/solar input, and rated/peak DC output specifications.

Protection Features and IP Rating

Lists overload/over-current protection and the device's IP65 ingress protection rating.

Wiring and Connection Guide

System Wiring Diagram

Explains the physical connections for AC input, battery, solar, and appliance output.

Understanding Indicators and Troubleshooting

LED Indicators

Describes the function of Charge and Dis-charge LEDs to indicate battery status.

Troubleshooting Common Issues

Provides guidance on resolving issues like zero output voltage by checking fuses and batteries.

Topens UPS01 Specifications

General

Brand	Topens
Model	UPS01
Category	UPS
Language	English