topmark XAVI - Page 30

30
ASSEMBLING
EN
9. Insert the small footrest base into the hole, then press it down and t it to the
desired posion.
10. Fix the cover to the seat part, insert the safety harness into the slot accordingly
and locked, fasten the buon on seat and fabric. The elasc should be passed
through footrest and xed.
The harness has 2 posions. The straps should go into the slots at, or the nearest
slots above the height of the child's shoulders. To adjust the harness, remove each
strap by passing it through the slots from the front to the back of the seat; re-route
the straps through the appropriate slots. If the shoulder height is not ok. Please
re- install the seat again.
c
Small footrest base can be
adjusted in 3 types of height.