3
THANK YOU for your purchase of 3D aerobatic airplane
SLICK 360 61” Skywing!
We made a main effort while drawing and building this RC model so that it is the best model you ever built and fly.
We provide you a kit with the highest quality and the best possible performances.
We wish you a great success while assembling and flying your new
SLICK 360 61” Skywing.
The
SLICK 360 61” Skywing
is a magnificent model that is both aesthetic, super solid and perfectly effective at low incidence (high speeds)
as well as very high alpha.
The enormous control surfaces and the low inertia allow incredible ultra aggressive maneuvers but perfectly controllable and this with a great
precision around the 3 axis for a complete 3D adventure.
The kit is beautiful with an extraordinary vivid art color scheme (2 schemes available) that catches the eye immediately.
The hyper-studied structure is a model of lightness and solidity.
Smart details like the EPP lip in the cowl air inlets to guide the fresh air through the motor, the square section carbon reinforcements at the
engine box and in the fuse, the special integrated motor mount, the ventilated spinner, the already decorated cockpit with a stylish stunt pilot,
the carbon servo arm extensions, the carbon tail wheel, the carbon main landing gear with molded fiberglass fairings between the gear and
the fuse, wing and stabilizer protection and transport bags make this ARF kit a must that will quickly become the standard for 3D 60” class
aerobatics!
IMPORTANT: Please take a few moments to read this instruction manual before beginning assembly. Do an inventory of the parts using the
parts list, to control that there is no lack or imperfection.
Thank you to contact TOPMODEL immediately, if you note a missing part or a damaged part.
WARRANTY: It is important to notify to TOPMODEL all damage or problems with this model within 14 days following the reception of the kit to
be able to benefit the warranty. In the event of return of the model, the customer is responsible for transport and return shipping cost is at his
expenses. In the event of defect, the part will be exchanged or replaced once this one will be delivered to TOPMODEL for expertise (transport
on your cost). In the event of problem, do not hesitate to contact TOPMODEL.
TOPMODEL cannot control the dexterity of the modeler and cannot influence the builder during the assembly or the use of this radiocontrolled
model, thus TOPMODEL will in no way accept or assume responsability or liability for damages resulting from the use of this user assembled
product.
The purchaser/user accepts all the responsabilities in the event of structural or mechanical problems.
REMINDER
We take great care to delivering the best possible quality.
We kindly remind you that these models are not ready to fly and that the remaining work is an important part to get the model flying. For this reason,
please, check all glue joints and assemblies.
Safety first!
We thank you for your attention during the assembly of our kits, and wish you good and numerous flights!
TOPMODEL SAS
To Next Page
Loading...
