3.3- TECHNICAL DATA
Tab. 1 contains the technical data characterising the actuators.
Tab. 1
Power supply voltage
Absorbed current
Absorbed power with load
Thrust force
Tractive force
Idle translation speed
Duration of idle stroke
Minimum window frame height
(1)
Adjustable stroke end
(2)
10 - 15 - 20 - 25 - 30 - 35 - 40 cm
Type of service
(4)
S
2
230 V - 50 Hz
ACK5/230V
0,32 A
75 W
300 N
300 N
27 mm/s
15 s
H = 800 mm
2 min
Operating temperature
Protection degree of electric devices
Adjustment of the window frame connection
Parallel electric connection of more
actuators on the same window
Only with proper
electronic device
Parallel electric connection of more
actuators on different windows
Actuator weight with brackets
Gross weight
(1)
Actuator distance from the window frame opening hinge
(2)
Tolerance on the precision of the output limit switch tripping: +/- 1 cm
(3)
The "buzzer" device is enabled automatically and emits a continuous "beep" as long as the
actuator is fed. For further details on its operation see par. 5.6
(4)
Service of limited duration according to EN 60034
- 5 ºC + 50 ºC
IP 55
10 mm
Yes
(see wiring diagram)
1,7 kg
1,9 kg
ACK5/24V
1,35 A
32 W
17 mm/s
23 s
3 min
(3)
Electronics with warning horn to signal to the user the wrong assembling
9
ACK5
TECHNICAL DESCRIPTION -3
INSTALLATION AND USE ISTRUCTIONS
24 V
Class II Class III
Protection against electric shocks
H = 600 mm
Top hung window
Bottom hung window
To Next Page
Loading...
Need help?
General
