TOPP S200 - Articulated Pushing Arm Installation; Articulated Arm Components; Articulated Arm Positioning

6
instructions for installation
11
22
33
44
ARTICULATED PUSHING ARM INSTALLATION
S200
xing plate
lower end of the frame
Piastra ssaggio
Bordo inferiore architrave
L’automazione va ssata sul lato opposto al cardine.
La distanza «A» varia secondo il tipo di perno prescelto come da tabella
sottostante.
The automation must be xed on the opposite side of the hinge.
The distance «A» varies according to the type of the Axle extension used see table.
xing plate
lower end of the frame
The automation must be xed on the opposite side of the hinge.
The distance «A» varies according to the type of the Axle extension used
see table.
COMPONENTS
1- Cover, triangular plates
and 6 xing screws
2- Automation S200
3- Fixing plate
4- Automation tting nuts
5- Articulated arm *
6- Axle extension and
corresponding screw (optional) *
* Supplied separately
Automation positioning with left hinge
Attention to the arrow on the xing plate, the lower edge of the frame
and the axis of rotation of the door
Automation positioning with right hinge
Attention to the arrow on the xing plate, the lower edge of the frame
and the axis of rotation of the door