8
UNOPLUS
2. Thread the jib halyard through the fairlead.
Rig the Uno Plus in the same way as the Uno with the
addition of the jib.
JIB SAIL
1. Ensure that the jib fairlead fitting on the mast is in the
centre of the opening on the mainsail.
3. Tie the jib halyard to the head of the jib sail using a
bowline knot.
4. Hoist the jib up to the top of the mast slot.
5. Cleat off the end of the jib halyard through
the cleat towards the foot of the mast.
TOPAZ UNO PLUS
RIGGING INSTRUCTIONS
TOPAZ UNO PLUS
INVENTORY
As TOPAZ UNO with the addition of:
Jib Sail
Jib Halyard
Jib Sheets
Small Shackle
6. Attach the clew of the jib sail to the rope loop
at the front of the hull as shown.
To Next Page
Loading...
