6
Precautions
• Ensure the loudspeaker outputs, including the headphone jack, do not short
circuit or connect to ground.
• Keep the amplifier in reasonably cool, dry environments.
• Avoid dropping the amplifier.
• Opening the amplifier housing instantly voids the warranty!
• If liquid should come in contact with or be spilled into the amplifier housing,
turn the power off immediately and disconnect the power supply. It is best to
allow the liquid several days to dry. In most cases, once the liquid has dried
the amplifier will operate normally.
• Only use the supplied power supply with the TP21.
• Maintain a proper volume level at all times. If you hear distortion in your
headphones or loudspeakers, reduce the volume level immediately. This will
preserve your loudspeakers and headphones from permanent damage.
• The TP21 is designed for indoor use only.
To Next Page
Loading...