EasyManua.ls Logo

Toptech TT-N-701 User Manual

Default Icon
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Una versión española de este
manual puede ser descargada
en www.pro1iaq.com
® U.S. Registered Trademark. Patents pending.
Copyright © 2006 Pro1 IAQ, Inc. All rights reserved.
Mounting and Battery Installation
For assistance with this product please visit
http://www.pro1iaq.com or call Pro1
Customer Care toll-free at 888-Pro1iaq
(776-1427) during normal business hours
(Mon-Fri 9 AM - 6 PM Eastern)
Rev. 0850
This manual covers TopTech models:
TT-N-701 and T701
Question and Answer IconNeed help?

Do you have a question about the Toptech TT-N-701 and is the answer not in the manual?

Toptech TT-N-701 Specifications

General IconGeneral
BrandToptech
ModelTT-N-701
CategoryThermostat
LanguageEnglish

Summary

Installation Tips

Wall Locations

Select installation locations 4-5 feet above the floor with good air circulation, avoiding direct sunlight or drafts.

Thermostat Quick Reference

Getting to Know Your Thermostat

Overview of the thermostat's LCD, buttons, and indicators like low battery and current room temperature.

Removing Private Label Badge

Instructions on how to gently remove the private label badge using a screwdriver.

Subbase Installation

Mounting Instructions

Guidance on screw placement for vertical and horizontal mounting of the subbase.

Wiring

Terminal Designations and Wiring Tips

Explanation of terminal functions and important tips for connecting wires, including common wire and heat pump systems.

Wiring Diagrams by System Type

Illustrations showing wiring configurations for various HVAC systems like 1H/1C, heat pump, and heat-only.

Technician Setup

Gas or Electric Setup

Setting the thermostat switch for gas or electric furnace operation and fan control.

Fahrenheit/Celsius Display Setting

How to select the temperature display unit (Fahrenheit or Celsius) using a jumper pin.

Compressor Delay Setting

Configuring the compressor delay feature (ON/OFF) using a jumper pin to prevent short cycling.

Adjusting the Temperature Swing

Adjusting the swing setting (cycle rate/differential) for heat and cool to control cycle frequency and comfort.

Room Temperature Calibration

Calibrating the room temperature display to match actual room temperature by adjusting the reading.

Mount Thermostat and Battery Installation

Mounting the Thermostat

Instructions on how to securely attach the thermostat to the installed subbase.

Battery Installation

Guidance on inserting AA batteries for power, noting it's optional if hardwired.

Specifications

Contact Information

Contact details for Pro1 IAQ Inc., including phone numbers, website, and hours of operation.

Related product manuals