TorcUP TU-2 User Manual (English)

Other manuals for TorcUP TU-2

Questions and Answers:

migueljohnsonAug 9, 2025

What to do if the piston will not advance or retract on my TorcUP TU-2?

A
Ann GuerreroAug 9, 2025
If the piston on your TorcUP Tools fails to advance or retract, there are several potential causes: * The couplers might not be securely attached to the tool or pump. Ensure all coupler connections are properly connected. * A coupler might be defective. Replace any defective couplers. * The remote control switch could be defective. Replace the switch and/or control pendant. * There could be dirt in the direction-control valve of the pump unit. Disassemble the pump and clean the direction-control valve.

Brand

Model

TU-2