2
Operational and Maintenance Manual for TorcUP
VT-500, VT-1000, VT-2000 & VT-3000
Battery-Powered Torque Wrenches
Version 1: 2017 Nov
The Volta tools contain alloy components which may
cause a hazard in certain explosive environments.
General Description of TorcUP VOLTA Series Battery-Powered Torque Wrenches
The VOLTA Series Battery-Powered Torque Wrench provides torque settings of up to
3,000 Ft/lbs in clockwise rotation, and its free joint execution allows for random positioning of
the tool.
NOTICE
Series VT-500, VT-1000, VT-2000 and VT-3000 Battery-Powered Torque Wrenches are designed
for installing and removing threaded fasteners requiring precise high torque during bolt makeup and
maximum torque during bolt breakout.
TorcUP Inc. is not responsible for customer modication of tools or for applications on
which TorcUP Inc. was not consulted.
WARNING
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING TOOL.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE INFORMATION IN THIS
MANUAL INTO THE HANDS OF THE OPERATOR.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
The use of other than genuine TorcUP replacement parts may result in safety
hazards, decreased tool performance, increased maintenance, and may invalidate
all warranties. Repairs should be made only by authorized personnel. Consult
your nearest TorcUP Authorized Service Center.
Refer All Communications to the Nearest TorcUP Ofce or Distributor.
For Technical Support & Information Contact:
TorcUP Inc.
1025 Conroy Place, Easton, PA 18040 USA
Phone: +1 610-250-5800 Fax:+1 610-250-2700
email: sales@torcup.com
To Next Page
Loading...
