7
After extended use of the VOLTA Series Torque Wrench, in the case of degrading performance
or other apparent damage, immediately send your VOLTA Series Torque Wrench to TorcUP,
Inc or contact your Local Representative or Distributor. The unit must be properly packaged for
shipping.
OPERATING PROCEDURES
NOTICE
TIGHTENING AND LOOSENING OF BOLTS OR NUTS
TIGHTENING AND LOOSENING OF BOLTS OR NUTS
• Beware of non-xed, freely rotating reaction arms or of rotating impact sockets.
• Loose clothes, long hair, cables, etc. are always to be kept away from the danger/rotation
area. When the machine is put into operation, it is mandatory to wear ear protection, safety
shoes and safety goggles.
• Never leave a running VOLTA Series Torque Wrench unattended and always be ready to
switch off the machine if necessary. Maintain a safe distance of arm length.
• Always place the impact socket or hex driver snugly onto the screw or nut/bolt. Faulty screw
or nut/bolt connections may result in exceeding the mechanical stress limit of the material,
causing it to break. Parts that splinter off may cause bruises or even life-threatening injuries.
When torquing and untorquing fasteners, always hold/position the VOLTA Series Torque Wrench in
line with the fastener axis to avoid damage to the application. See Figure 1 on the following page.
WARNING
To Next Page
Loading...
