Torin BIG RED T31002 - User Manual

Questions and Answers

L
lauradavisAug 7, 2025
What to do if my Torin BIG RED T31002 jack will not lift load?
- M
  Michelle GrayAug 7, 2025
  If your Torin BIG RED Construction Equipment jack isn't lifting, there could be several reasons. First, ensure the release valve is completely closed by turning the handle clockwise. It's also possible you've exceeded the weight capacity. Another cause might be air in the hydraulic system, which requires purging. Check the oil level and add oil if it's low. Finally, the power unit may be malfunctioning, requiring replacement.
J
Joe DiazAug 12, 2025
Why is my Torin BIG RED T31002 Construction Equipment jack not holding the load?
- M
  milleramberAug 12, 2025
  If your Torin BIG RED Construction Equipment jack isn't holding a load, it could be due to a low oil level, so add oil as needed. Alternatively, the power unit might be malfunctioning and need replacement.
J
jacksondonaldAug 18, 2025
What to do if my Torin BIG RED T31002 Construction Equipment has poor lifting performance?
- J
  jesse79Aug 18, 2025
  If your Torin BIG RED Construction Equipment exhibits poor lifting, it might be due to air in the hydraulics, so you should purge the air from the system. Also, check the oil level and add oil if necessary. A malfunctioning power unit could also be the cause, which would require replacing the power unit.
D
Dustin GrahamAug 25, 2025
How to fix a Torin BIG RED T31002 jack that will not lower?
- J
  Jennifer Bond MDAug 25, 2025
  If your Torin BIG RED Construction Equipment jack won't lower, it might be because the oil reservoir is overfilled; drain the excessive oil and lubricate moving parts. Another possibility is that the jack is binding or there's a foreign obstruction.
S
Stephen NelsonAug 31, 2025
Why my Torin BIG RED Construction Equipment will not lift to full extension?
- M
  mclaughlinerikaAug 31, 2025
  If your Torin BIG RED Construction Equipment isn't lifting to its full extension, check the oil level and add oil if it's low. Also, the power unit may be malfunctioning and require replacement.