To Next PageTo Next PageWhat to do if Torin BIG RED T51201 Power Tool jack will not hold load?
If your Torin BIG RED Power Tool jack won't hold a load, there could be several reasons. First, you might have exceeded the weight capacity. Another potential cause is a low oil level; if this is the case, add oil as needed. Finally, the power unit may be malfunctioning, requiring replacement.
Why Torin BIG RED T51201 jack will not lower?
If your Torin BIG RED Power Tool jack won't lower, it could be due to a few reasons. One possibility is that there's air in the hydraulics; if so, you'll need to purge the air from the system. Another cause might be an overfilled oil reservoir, in which case you should drain the excessive oil and lubricate the moving parts. Finally, it could be binding or a foreign obstruction.
Instructions for recording product details like model name, number, and purchase date for future reference.
Outlines the user's duty to read and follow the manual for safe operation and maintenance.
Details the specific applications and tasks the shop press is designed for in repair environments.
Lists key performance metrics and dimensions of the 12 Ton Shop Press.
Emphasizes understanding instructions, safe operation, and acknowledging limitations of manual warnings.
Highlights critical precautions for safe shop press operation and use.
Provides guidelines on preventing modifications, checking parts, proper storage, and user restrictions.
Details essential checks before operating the press, including condition, lubrication, and work area safety.
Lists essential safety instructions and warnings to be followed during operation and use.
Provides crucial advice on protective gear, situational awareness, personal conduct, and safe working practices.
Guides through the complete assembly of the shop press, from frame construction to installing the jack.
Details the process of attaching and securing the handle to the bottle jack.
Guides through the complete air purging process for the hydraulic system to ensure proper function.
Details essential checks and procedures to perform before operating the shop press.
Guides through the complete operation of the shop press, including applying load and retracting the ram.
Details what to inspect on the product before each use for performance and safety.
Explains how to handle binding and its potential causes like rust or worn parts.
Provides methods for cleaning obstructed moving parts and removing rust.
Outlines the importance of lubrication, frequency, and types of lubricants to use.
Advises on daily checks for rust on rams and plungers and how to clean them.
Mentions that some models have grease fittings requiring regular lubrication.
Explains the hydraulic mechanism of the ram's up and down movement.
Details how to properly retract and store the ram and the press.
Guides on checking and refilling the hydraulic oil in the jack to maintain the correct level.
Provides complete instructions for draining, refilling, and purging the hydraulic oil in the jack.
Lists critical warnings regarding the type of fluids to use and avoid in the hydraulic jack.
Explains periodic lubrication for pivot points and saddle extension threads for smooth operation.
Details the 1-year limited warranty, what it covers, and how to get assistance.
Provides contact information and website for customer support and inquiries.
Elaborates on the warranty terms, exclusions, user responsibilities, and governing law.
General| Brand | Torin BIG RED |
|---|---|
| Model | T51201 |
| Category | Power Tool |
| Language | English |
