Torin BIG RED T830025 User Manual

6
TO ADD JACK OIL
TO REPLACE JACK OIL
1. Position the jack on level ground and lower the
saddle.
2. Open release valve by turning handle counter-
clockwise.
3. Remove the oil ll plug.
1. Position the jack on level ground and lower the
saddle.
2. Remove the oil plug.
3. Fill the oil case until oil level is just beneath the
lower rim of the oil ll hole.
4. Replace oil plug.
5. Perform the Air Purge Procedure.
4. Turn the jack on its side to drain old oil from the
oil ll hole.
5. Position the jack on level ground and keep saddle
in the lowered position. Fill the oil case until oil
level is just beneath the lower rim. Keep dirt and
other foreign materials clear when pouring.
6. Replace oil plug.
7. Perform Air Purge Procedure.

Torin BIG RED T830025 Specifications

General

Brand	Torin BIG RED
Model	T830025
Category	Jacks
Language	English