To Next PageTo Next PageWhy my Torin BIG RED TZ830009 will not hold load?
If your Torin BIG RED Jack won't hold the load, ensure the release valve is fully closed by turning the handle clockwise. Also, a malfunctioning power unit could be the cause, and it may need replacement.
What to do if my Torin BIG RED Jack will not lift the load?
If your Torin BIG RED Jack won't lift the load, there might be several reasons. First, check that the release valve is completely closed by turning the handle clockwise. It's also possible that the weight capacity has been exceeded. Another potential cause is air in the hydraulics, in which case you should purge the air from the system. Finally, the power unit might be malfunctioning, requiring replacement.
How to fix poor lifting in Torin BIG RED TZ830009?
If you're experiencing poor lifting performance with your Torin BIG RED Jacks, it could be due to a low oil level. Add oil as needed. Alternatively, air in the hydraulics can cause this issue, so try purging the air from the system.
What to do if my Torin BIG RED TZ830009 will not lower?
If your Torin BIG RED Jack won't lower, the oil reservoir might be overfilled. Drain the excessive oil and lubricate the moving parts. Also, check for any binding or foreign obstructions that may be preventing it from lowering.
Steps and precautions for lifting the vehicle with the jack.
Procedures and warnings for safely lowering the vehicle.
General| Model | TZ830009 |
|---|---|
| Type | Floor Jack |
| Material | Steel |
| Color | Red |
| Warranty | 1 year |
| Capacity | 3 Ton |
