Tork Elevation T26 - Additional Mounting Information; Mounting Template Guide

Washroom Dispenser Service and Parts Manual
T26 Tork Bath Tissue Roll Dispenser
555620 - 555628
Revision Date: 3-12-18
8 of 10
Essity Internal
Recommended Mounting Height (standard access)
Mount the bottom of the dispenser 27.5” (70cm) above the finished floor for standard access.
Mounting Template
A full sized 11” x 17” copy of the mounting template is included in the original packaging. The image
below represents the mounting template. This image is not full size, and should not be used to locate and
drill holes.