Need help?Do you have a question about the Torklift F2012 and is the answer not in the manual?
General| Brand | Torklift |
|---|---|
| Model | F2012 |
| Category | Automobile Accessories |
| Language | English |
Advises against plastic bed liners to prevent damage and voided warranty.
Recommends StableLoad for reduced body roll, sag, and sway. Cautions against airbag over-pressurization.
Locate driver side leaf spring perch and identify parking brake cable bracket for installation.
Install top plate between parking brake cables and leaf spring hanger, securing with hardware.
Install 7/16" bolt through hanger bracket and top plate using specific washers and nut.
Place 3/4" washer and secure F2012 Receiver with M20 locking hex nut.
Connect F2012 Receiver to Top Plate using 3/8" bolts, washers, and nuts.
Specifies torque values for all bolts and nuts used in the installation process.
Connect parking brake bracket and repeat driver side installation for the passenger side.
Explains tie-down insert orientation (bullet plate) and notes on clearance and potential rattle.
Outlines warranty coverage, exclusions, and conditions that void the warranty.
Instructions for registering the product for the lifetime warranty via fax, email, or mail.
To Next Page
