6
EN
Knife sharpening for the kitchen
The Tormek T-1 Kitchen Knife Sharpener is a quick, easy, and clean way to sharpen knives in
the convenience of your own kitchen. This advanced development of the traditional diamond
bench stone, combined with the patented sharpening angle guide, makes it possible
to sharpen kitchen knives at home with the same or better results than a professional
sharpening service. The Tormek T-1 sharpening method consists of two steps: sharpening
on the diamond grinding wheel, followed by honing on the composite honing wheel.
Instructions
SPECIFICATIONS, TORMEK T-1 KITCHEN KNIFE SHARPENER
DIMENSIONS
Width 8" (204 mm)
Depth 7¾" (196 mm)
Height 7" (181 mm)
WEIGHT
Weight of machine: 11.9 lbs (5.4 kg)
GRINDING WHEEL
DF-150 Conical Diamond Wheel Fine
∅ 5"× " (150 × 18 mm)
Max 200 rpm
HONING WHEEL
∅ 6 ¼"× 1 3/16" (160 × 30 mm)
MATERIAL
Fully cast in zinc, powder coated
Lower section in impact resistant ABS
plastic
MOTOR
Single phase AC motor 120 W (input power)
220–240 V, 50–60 Hz
or 100–115 V 50–60 Hz
Maintenance-free
Runs at low noise, 45 dB
Min. 10,000 hours of operating time
WARRANTY
8-year warranty. 5 years + 3 years when
registering the machine at tormek.com
PATENT
See tormek.com/patents for all patents
Unlimited
KNIFE BLADE LENGTH
½"–2"
(12–60 mm)
KNIFE BLADE HEIGHT
Up to 3/16"
(5 mm)
KNIFE BLADE WIDTH
For indoor, home use only. Do not use in wet or damp places.
To Next Page
Loading...
