2
2
Fill the anti-foam tank (1) with an appropriate
de-foamer solution.
1
Important – Always use low foaming carpet cleaning chemicals. If using foaming carpet cleaning
chemical, or if foam develops due to residues in the carpet, ensure that an appropriate de-foamer
is used in the anti-foam tank. Incorrect chemicals could cause damage to the carpets being
cleaned or cause the machine to malfunction
2. Operating Instructions
4
Switch on the vacuum (1) and/or spray (2).
1
2
5
Squeeze the trigger (1) to spray solution onto
the carpet/upholstery. Maintain a constant
pressure of the wand/tool onto the surface to
be cleaned.
1
3
Connect the cable to main power and ensure
the slider on top of the trigger unit (1) is in the
closed position.
1
T-QSG98132 08/2022
3. Additional Parts Required
There are no additional part required.
1
Fill the removable solution tank (1) with
detergent and water up to the full line. Use the
correct dilution rate for the detergent. Never
over fill.
1
To Previous Page
Loading...
