Tornador ZV-200 User Manual

Follow safety guidelines: keep out of reach of children, use approved products, avoid pointing tool at body.

Avoid breathing dust, wear hearing and eye protection, use respiratory protection for nebulized liquids.

Disconnect from air supply when not in use, check for leaks, and use caution with others present.

Requires 5.5-6.3 CFM at 78-90 psi; do not exceed 90 psi for optimum performance.

Ensure air supply tank and lines are free from impurities, oil, and water contamination.

Check all contents, read instructions, and ensure Z-020 Tornador Black is in good working condition.

Steps for removing the cone and attaching the small flexible tube to the rotation set.

Steps for attaching the vacuum unit to the Z-020 Black, including using the flat plastic key and reducer.

Use two hands for control: one on attachment, one on gun assembly. Depress trigger to begin.

Switch between 'Air Only' and 'Liquid Position' for vacuuming and cleaning with solutions.

Keep the tool clean, disconnect from air/vacuum before maintenance, and oil the rotation set.

Ensure attachment is free of dirt buildup to maintain performance and prolong the life of the rotation set.

Highlights include double power, new ball bearing rotation, low wear, lower air consumption, and lower noise.

Latest addition, adds powerful vacuum to Tornador cleaning, quickest interior cleaning.