1.6 1.6
CONTENTS
CONTENTS Page No.
Fuel level gauge 1.37
Hour meter 1.37
Transmission neutral indicator light 1.38
Cutterhead drive switch indicator light 1.38
Parking brake indicator light 1.38
Hydraulic return lter indicator light 1.38
Hydraulic transmission lter indicator light 1.38
Cutterhead position control 1.39
Dual lift conguration control 1.39
Cutterhead drive engagement 1.40
Weight transfer / traction assistance 1.40
Starting the engine 1.41
Stopping the engine 1.42
Unblocking the cutting cylinders 1.42
General operating hints 1.43
Centre cutterhead height of cut correction adjustment 1.43
Cutterhead general information 1.44
MK3 200mm xed cutterhead 1.45
MK3 254mm xed cutterhead 1.45
MK3 200mm oating cutterhead 1.46
MAINTENANCE 1.47 - 1.63
Maintenance 1.47 - 1.48
Engine 1.49
Running in period 1.49
Running in period - at rst 50 hours 1.49
Daily and before use 1.50 - 1.53
Every 50 hours 1.54 - 1.55
Every 250 hours 1.56
Every 500 hours 1.57 - 1.58
Cutterhead cylinder to bottom blade adjustment 1.59
Cutterhead back lapping 1.60
Cutterhead grinding 1.61
Cutterhead bottom blade replacement 1.61
Raising the mower off the ground 1.61
Towing the mower 1.62 - 1.63
GRASS CUTTING FAULTS 1.64 - 1.65
TROUBLE SHOOTING 1.66 - 1.69
ELECTRICAL CIRCUIT DIAGRAM 1.70 - 1.72
TRANSMISSION/BRAKE HYDRAULIC CIRCUIT DIAGRAMS 1.73 - 1.74
HYDRAULIC CIRCUIT DIAGRAMS 1.75 - 1.76
WARRANTY 1.77
NOTES 1.78 - 1.81
INTERNATIONAL DISTRIBUTION LIST 1.82
CUSTOMER INFORMATION 1.83