1.63 1.63
Towing The Mower continued
Re-commission the front wheel motor disc brakes
as follows :-
1. Identify the right hand front wheel motor disc
brake assembly. Rotate the setscrew (item
5) anti-clockwise and remove together with
washer (item 4) and brake release bar (item 3).
Reassemble the rubber plug (item 2) into the
motor end plate.
2. Identify the left hand front wheel motor disc
brake assembly and repeat the previous
procedure.
Store the brake release bars, washers and setscrews
(items 3, 4 and 5) for future use.
Remove the wheel chocks.
Disconnect the tow bar.
The mower braking system will now operate in the
normal way.
WARNING: PREVENT ACCIDENTS - Before
using the mower, ensure that the braking system
operates correctly. Carry out initial checks with
the mower at slow speed.
Do not operate the mower with a defective
braking system.
Do not operate the mower with the brakes
de-commissioned.
MAINTENANCE
1. Front wheel motor - 111-2557
2. Hex Plug - 950639
3. Brake release bar
4. Washer - M12 - 09485
5. Setscrew M12 x 40 - ZDH1L040U
To Next Page
Loading...
