Reelmaster 7000- D Hydraulic SystemPage 5 - 111
NOTE: The front wheel motors are identical (Fig. 67).
The rear axle motor includes a flushing valve (Fig. 68)
for cooling the closed loop traction circuit and therefore
has some differences from the front motors. Use the
same procedure to service of the front wheel motors and
rear axle motor (see the Sauer- Danfoss K and L Frame
Variable Motors Service Manual for additional informa-
tion).
1. Plug
2. O- ring
3. Centering spring
4. Spring retaining washer
5. Shift spool
6. Plug
7. O- ring
8. Centering spring
9. Orifice poppet
10. End cap
Figure 68
2
3
6
8
9
1
5
7
4
1
2
3
4
REAR AXLE MOTOR FLUSHING VALVE
10
Hydraulic
System
To Next Page
Loading...
