Toro 04202 - Setting the Machine to Match Turf Conditions

Setting the Machine to
Match Turf Conditions
Use the follo wing table to set the mac hine to
matc h turf conditions .
Flex Greensmower Cutting Unit Set-up Matrix
Bedbars: Standard and Optional
Part Number
Description
Mower
Aggressiveness
Comments
106-2468-01
Standard Flex 21
Less
Standard
99-3794-03
Aggressive
Flex 21
More
110-2282-01
Standard Flex 18
Less
Standard
110-2281-03
Aggressive
Flex 18
More
Bedknives: Standard and Optional
Part Number
Description
Mower
Height of Cut Range
Comments
93-4262
Microcut
Flex 21 0.062 - 0.125 inches Standard
93-4263
Tournament
Flex 21 0.125 -0.25 inches
93-4264 Low Cut
Flex 21 0.25 inches and up
108-4303
Extended Microcut Flex 21 0.062 - 0.125 inches
Less Aggressive
98-7261
Microcut
Flex 18 0.062 - 0.125 inches Standard
98-7260
Tournament
Flex 18 0.125 -0.25 inches
110-2300
Extended Microcut Flex 18 0.062 - 0.125 inches
Less Aggressive
110-2301 Low Cut
Flex 18 0.25 inches and up
Rollers: Standard and Optional
Part Number
Description
Mower
Diameter/Material
Comments
107-9037
Narrow Wiehle Flex 21 2.5 inches Aluminum Standard Front
107-9038
Wide Wiehle Flex 21 2.5 inches Aluminum
More Penetration
107-9039
Full Roller Flex 21 2.5 inches Steel
Least Penetration
107-9036
Rear Roller Flex 21 2.0 inches Aluminum Standard Rear
106-6945
Rear Roller Flex 21 2.0 inches Steel Steel Rear
110-2304
Narrow Wiehle Flex 18 2.5 inches Aluminum Standard Front
110-2305
Wide Wiehle Flex 18 2.5 inches Aluminum
More Penetration
110-2306
Full Roller Flex 18 2.5 inches Steel
Least Penetration
110-2303
Rear Roller Flex 18 2.0 inches Aluminum Standard Rear
36