EasyManua.ls Logo

Toro 07211TC - Maintenance; Recommended Maintenance Schedule

Toro 07211TC
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
Maintenance
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
After first 10 hours
• Check cable adjustments
• Torque wheel lug nuts
• Replace transaxle filter
After first 50 hours • Replace the engine oil and filter.
Every 50 hours
• Check the battery fluid level.
• Check the battery cable connections.
• Service the air cleaner.
Every 100 hours
• Lubricate all grease fittings
• Inspect condition and wear of tires
• Check front differential oil level (4WD)
• Replace engine oil and filter
• Inspect cooling system hoses
• Check governor oil level
Every 200 hours
• Check cable adjustments
• Check alternator, governor and fan belts
• Change air cleaner filter
• Check front axle CV boot joint (4WD)
• Check engine RPM (idle and full throttle)
• Torque wheel lug nuts
Every 400 hours
• Check front wheel alignment
• Inspect service and parking brakes
• Inspect fuel lines
• Replace fuel filter
• Adjust valves
• Replace spark plugs and check timing
Every 800 hours
• Replace transaxle filter
• Change transaxle oil
• Clean transaxle strainer
• Pack front wheel bearings
• Change front differential oil (4WD)
Every 1200 hours or 2
years (whichever
occurs first)
• Replace all interlock switches
• Coolant System – flush/replace fluid
• Change brake fluid
Every 2000 hours or 2
years (whichever
occurs first)
• Replace engine timing belt
1
immediately after every washing, regardless of the interval listed
Important Refer to your engine operator’s manual for additional maintenance procedures.

Table of Contents