Toro 20330 - Low Wheel Walk Power Mower - Engine Starting and Self-Propel Drive; Adjusting Cutting Height Details; Starting the Engine; Using the Self-Propel Drive

Adjustthecuttingheightasdesired.Setthefrontwheels
tothesameheightastherearwheels.
Note:Toraisethemower,moveallthecuttingheight
leversrearward.Tolowerthemower,moveallthe
cuttingheightleversforward(Figure9).
Figure9
1.Raisethemower2.Lowerthemower
Note:Thecuttingheightsettingsare1inch(25mm);
1-3/8inches(35mm);1-3/4inches(44mm);2-1/8
inches(54mm);2-1/2inches(64mm);2-7/8inches(73
mm);3-1/4inches(83mm);3-5/8inches(92mm);and
4inches(102mm).
StartingtheEngine
1.Holdthebladecontrolbaragainstthehandle
(Figure10).
Figure10
1.Bladecontrolbar2.Recoilstarthandle
2.Pulltherecoilstarthandlelightlyuntilyoufeel
resistance,thenpullitsharply.Allowtheropeto
returntothehandleslowly(Figure10).
Note:Ifthemowerdoesnotstartafterseveral
attempts,contactanAuthorizedServiceDealer.
UsingtheSelf-propelDrive
Tooperatetheself-propeldrive,squeezetheself-propel
drivebar(Figure11)towardthehandleandholdit.
Figure11
1.Self-propeldrivebar
Todisengagetheself-propeldrive,releasetheself-propel
drivebar.
7