Toro 20333 - Mower Setup and Initial Filling; Installing Blade Control Bar and Handle; Filling the Engine with Oil Procedure

Setup
Important:Removeanddiscardtheprotective
plasticsheetthatcoverstheengine.
1.InstallingtheBladeControl
Bar
Procedure
Installthebladecontrolbarintotheupperhandle
(Figure3).
Figure3
2.InstallingtheHandle
Procedure
Foldingorunfoldingthehandleimproperlycan
damagethecables,causinganunsafeoperating
condition.
•Donotdamagethecableswhenfoldingor
unfoldingthehandle.
•Ifacableisdamaged,contactanAuthorized
ServiceDealer.
1.Removethehandleknobsfromthemowerhousing
(Figure4).
Important:Routethecablestotheoutsideof
thehandleknobsasyouinstallthehandle.
Figure4
2.Movethehandletotheoperatingposition.
3.Installandtightenthehandleknobsthatyou
removedinstep1(Figure4).
3.FillingtheEnginewithOil
Procedure
Yourmowerdoesnotcomewithoilintheengine,butit
doescomewithabottleofoil.
1.Removethedipstick(Figure5).
Figure5
1.Dipstick
2.Slowlypouroilintotheoillltubeuntiltheoillevel
reachestheFulllineonthedipstick(Figure5).Do
notoverll.(Max.ll:20oz.(0.59l),type:SAE30
5