Toro 22295 - Shutting off the Engine; Operating the Self-Propel Drive

Figure16
1.Choke3.Slow
2.Fast4.Throttle-controllever
Note:Donotusethechokewhentheengineiswarm.
4.Holdtheblade-controlbarintheRun/Shiftposition,
about2.5cm(1inch)belowthehandle(Figure17).
Figure17
1.Handle3.Blade-controlbarinthe
Run/Shiftposition—about
2.5cm(1inch)belowthe
handle
2.Blade-controlbarinthe
Run/Driveposition
4.Blade-controlbarinthe
Stopposition
5.Pullthestarterhandlelightlyuntilyoufeelresistance,
thenpullitsharply.
Note:Allowtheropetoreturnslowlytotherope
guideonthehandle.
6.Whentheenginestarts,movethethrottle-controllever
totheFASTposition(Figure16).
ShuttingOfftheEngine
Releasetheblade-controlbar.Boththeengineandtheblade
shouldstopwithin3seconds.Iftheydonot,contactan
AuthorizedServiceDealer.
Note:Closethefuelvalvebymovingthefuel-valvelever
(Figure15)totheleftifyouwillnotbestartingtheengine
soonafterward.
OperatingtheSelf-Propel
Drive
Thismachinehas3groundspeeds:1(slow),2(medium),
and3(fast);italsohasaNeutral(N)position.The
self-propel-driveleverislocatedbelowandbehindthefuel
tank(Figure18).
Figure18
1.Self-propel-drivelever
1.Movetheself-propel-drivelevertothedesiredground
speed.
2.Starttheengine.
3.Squeezetheblade-controlbaragainstthehandletothe
Run/Driveposition(Figure19).
13