Toro 267-H - User Manual

Questions and Answers

B
Bradley RobinsonAug 21, 2025
What to do if Toro 267-H Tractor has no drive in one direction?
- S
  Stacy WebsterAug 21, 2025
  If your Toro Tractor isn't driving in one direction, it could be due to a bent or broken control pedal, a bent or binding control pedal rod, a sheared control arm roll pin, or directional valves that are sticking or have broken springs. You should replace the bent or broken control pedal, inspect and straighten or replace the control pedal rod, replace the sheared control arm roll pin and clean or replace directional valves and springs.
M
mary05Aug 27, 2025
Why is my Toro 267-H losing power in only one direction?
- S
  scott69Aug 27, 2025
  If your Toro Tractor is experiencing low power in only one direction, the potential causes include: incorrect oil level, a bent or binding control pedal or shaft, a bent or binding control rod, a control arm that is not secure on the shaft, a worn swash plate, or a damaged output pinion or differential assembly. Check and correct the oil level. Inspect and repair the control pedal or shaft. Inspect and replace the control rod. Ensure the control arm is secure on the shaft. Repair or replace the swash plate and inspect and repair or replace the damaged assembly.
K
Kimberly GarciaSep 2, 2025
What to do if my Toro 267-H Tractor creeps in neutral?
- J
  Joel MillerSep 2, 2025
  If your Toro Tractor creeps in neutral, it could be due to a neutral adjustment eccentric out of position, a bent or binding control pedal, a damaged swash plate control lever pin, failed swash plate cradle bearings, damaged ball and socket, or a failed neutral return spring. Adjust the neutral adjustment eccentric. Inspect and repair the control pedal. Replace the damaged or worn swash plate control lever pin. Replace the failed or worn swash plate cradle bearings. Inspect and replace damaged or worn ball and socket. Replace the failed or out of position neutral return spring.
D
dylanperkinsNov 8, 2025
Why Toro Tractor won't drive?
- C
  Christopher MartinNov 8, 2025
  There are several reasons why your Toro Tractor might not drive. It could be due to: an incorrect oil level, a faulty or misadjusted drive belt, the push valve being in the wrong position, the parking brake being engaged, a problem with the control pedal linkage, sheared or missing pulleys, a sheared or missing wheel hub key, a stuck push valve or broken spring, damage to internal components, or a damaged pinion shaft or differential assembly. You should check and correct the oil level, inspect and replace or adjust the drive belt, move the push valve to the correct position, disengage the parking brake. Also, tighten, repair, or replace the control pedal linkage. Inspect and replace any sheared or missing pulleys. Check and replace the wheel hub key. Repair or replace the stuck push valve...
R
Robin MartinNov 14, 2025
Why is my Toro Tractor losing power in both directions?
- R
  Rose JenkinsNov 14, 2025
  If your Toro Tractor is experiencing low power in both directions, the cause could be due to several factors: incorrect oil level, a faulty drive belt, a partially activated push valve, the parking brake being engaged or binding, binding in the control pedal or linkage, loose or damaged pulleys, sticking directional valves, damage to internal components, a worn swash plate, or a damaged output pinion or differential assembly. Make sure to check and correct the oil level, inspect and replace or adjust the drive belt and ensure proper engine RPM. Ensure the push valve is fully activated and disengage the parking brake. Inspect and fix any binding in control pedal or linkage. Tighten or replace loose, damaged, or worn pulleys. Clean or replace directional valves and springs. Service or replac...