Haul the Machine (continued)
3. Lower the ramp(s).
4. Load the machine onto the trailer with the heavy end up the ramp, carrying loads low.
• If the machine has a full hopper, drive the machine forward up the ramp
.
• If the machine has an empty hopper, back the machine up the ramp
.
g357132
5. Engage the parking brake and shut off the engine.
6. Use the metal tie-down loop to securely fasten the machine to the trailer or truck with
straps, chains, cable, or ropes . Refer to local regulations for tie-down requirements.
G376092
IMPORTANT
Do not use the tie-down loops to lift the machine.
Unloading the Machine
1. Lower the ramp(s).
2. Lower the operator platform.
3. Unload the machine from the trailer with the heavy end up the ramp, carrying loads low.
g357130
• If the machine has a full hopper, back it
down the ramp
.
• If the machine has an empty hopper, drive
it forward down the ramp
.
3451-705A Page 4–13 Operation: After Operation
To Next Page
Loading...
