Toro 74200 - Page 43

Troubleshooting
41
PROBLEM CORRECTIVE ACTIONPOSSIBLE CAUSES
Engine overheats.
1. Engine load is excessive. 1. Reduce ground speed.
2. Oil level in crankcase is low. 2. Add oil to crankcase.
3. Cooling fins and air passages
under engine blower housing
are plugged.
3. Remove obstruction from
cooling fins and air passages.
Abnormal vibration.
1. Engine mounting bolts are
loose.
1. Tighten engine mounting
bolts.
2. Loose engine pulley, idler
pulley, or blade pulley.
2. Tighten the appropriate
pulley.
3. Engine pulley is damaged. 3. Contact Authorized Service
Dealer.
Machine does not drive.
1. Traction belt is worn, loose or
broken.
1. Contact Authorized Service
Dealer.
2. Traction belt is off pulley. 2. Contact Authorized Service
Dealer.
3. Hydro fluid level low. 3. Add hydro fluid to reservoir.