Toro 74209 - Waste Disposal

Maintenance
59
m–3740
1
3
2
1
Figure 52
1. Push arm
2. 15–5/16” (389 mm)
nominal
3.
Jam nut
4. Ball joint
11. Rotate the belt guide, on rear of the mower, so it
is 1/8”–1/4” (3–7 mm) away from the vertical
side of the PTO belt (Fig. 53).
2

1
3
Figure 53
1. Belt guide
2. PT O Drive belt
3. 1/8”–1/4” (3–7 mm)