Toro 74312 - Opening the Crate; Removing the Machine from the Crate

ProcedureDescription
Qty.
Use
9
Nopartsrequired
–
Chargethebattery.
10
Nopartsrequired
–
CheckthehydraulicFluid.
11
No.2lithiumgrease(Purchase
separately.)
1tube
Checkthemachineforgrease.
12
Nopartsrequired
–
Checkthemachinebeforedeliveryto
thecustomer.
Operator'sManual
1
Engineowner'smanual1
Registrationcard1
Operatortrainingmaterial
1
13
Key2
Deliverthemachinetothecustomer.
1
OpeningtheCrate
NoPartsRequired
Procedure
1.Lowertheendsofthecrate.
2.Removetheretainingstraps.
3.Removetheplastictiesaroundthehopper
handles.
2
RemovingtheMachine
fromtheCrate
Partsneededforthisprocedure:
1Rearcasterwheel
1
Bolt(1/2x13inches)
1
Locknut(1/2inch)
DrivingtheMachineOfftheCrate
CAUTION
ThemowerdeckisshippedintheUpposition,
butitisnotlatched.Removingshipping
reinforcementswithoutsupportingthefront
ofthedeckcausesthedecktodrop,which
mayresultininjuryorpropertydamage.
Alwayssecurelysupportthefrontofthedeck
whilesettingupthemachine.
Note:Ensurethatthedischargetubedoesnotcatch
onthecratewhendrivingthemachineoffthecrate
(Figure4).
1.Removetherearcaster-wheelassemblyfrom
insidethehopper.
2.Removetheboltholdingtherear-framesupport
totheframe(Figure1).
2