Toro 74732 User Manual (English)

Questions and Answers:

A
Antonio BryanSep 6, 2025
Why does my Toro 74732 Lawn Mower engine lose power?
- P
  Pamela GeorgeSep 6, 2025
  If your Toro Lawn Mower engine is losing power, consider these potential causes: The engine load might be too high, so reduce the ground speed. A dirty air cleaner can restrict airflow, so clean the air-cleaner element. Check the oil level in the crankcase and add oil if necessary. Clear any obstructions from the cooling fins and air passages under the engine blower housing. Replace the spark plug(s) if it is pitted, fouled, or the gap is incorrect. If there is incorrect fuel in the fuel tank, drain the tank and replace the fuel with the proper type. For issues like a blocked fuel-tank vent, dirt, water, or stale fuel in the fuel system, it's best to contact an Authorized Service Dealer. Also, if there is dirt in the fuel filter, replace the fuel filter.
K
Kaitlyn SmithSep 7, 2025
Why is the cutting height uneven on my Toro 74732?
- J
  Jorge WilliamsSep 8, 2025
  If the cutting height on your Toro Lawn Mower is uneven, consider these possible causes: * Sharpen the blade(s) if they are not sharp. * Install a new cutting blade(s) if the current one(s) is/are bent. * Level the mower from side-to-side and front-to-rear. * Adjust the anti-scalp wheel height if an anti-scalp roller is not set correctly. * Clean the underside of the mower deck if it is dirty. * Adjust the tire pressure if it is incorrect. For a bent blade spindle, contact an Authorized Service Dealer.
C
Cynthia EspinozaSep 9, 2025
Why is my Toro Lawn Mower engine overheating?
- C
  Christopher HillSep 9, 2025
  If your Toro Lawn Mower's engine is overheating, there could be several reasons. First, the engine load might be excessive, so try reducing your ground speed. Check the oil level in the crankcase and add oil if it's low. Inspect the cooling fins and air passages under the engine-blower housing for any obstructions and remove them. Also, a dirty air cleaner can cause overheating, so clean or replace the air-cleaner element.